Contact Us    |    Shipping

  • Services
      Kiln Drying

    Shell Dry: Kiln drying timbers to 24% moisture content and 2" material to 19% moisture content for adequate chemical penetration.

    Heat Treat and Stamp: Material is heated to a core temperature of 136 degrees for 30 hours, then end stamped "HT" and paper wrapped

    Kiln Dry after Treatment: (KDAT) Material that is Kiln dried, timbers down to 24% moisture, 2" material down to 19% moisture content after pressure treating.

    Please note: Manke Lumber sells wholesale direct to retailers and is not open to the public


    Home | Treatments | Services | Products | Fasteners | Contact Us | Shipping
    © 2006 Manke Lumber Company, Inc. All rights reserved.